Search This Blog

Showing posts with label 3 Week Rotation. Show all posts
Showing posts with label 3 Week Rotation. Show all posts

Tuesday, 1 December 2015

2D Workshops: 3 Week Rotation

2D Workshop

Introduction

This post is about the 2D workshops I attended over the three weeks. We used Toon Boom, a 2D animating software much like Adobe Flash. Within those three weeks I will learn how to use Toon Boom effectively and animate applying the animation principles in a 2D medium. 

Session 1: 26/11/15

We started the session with an introduction to Toon Boom and what it is. We also went through the tools and interface learning where they are what the tools did. Using the graphics tablets we just experimented with the tools to see what they were like and seeing the results of the different settings we applied to those tools. 

After a brief introduction we started to animate a bouncing ball. Starting with a layout drawing on a different layer, we planned what would happen first.

We then had to animate this ball by applying the animation principles such as squash and stretch and spacing. When I animated my ball, I feel that I added too much squash and stretch because the fall was not great enough for the ball to exert or portray that amount of energy when it strikes the floor. 

Next we added a background to the scene; the ball would bounce in a setting and when we rendered the scene the ball would not be surrounded by just black space. 


After animating the ball, we continued with colour pallets by extracting the colours from our preferred media (such as posters, album, covers ect) and adding them to a master pallet. Doing this would allow us to link this 'master-pallet' to other Toon Boom documents and transfer this pallet to be used. I will find this useful because this allows me to save a collection of colours that i can use in the future if needed rather than waste time creating a new colour pallet every time I open a new Toon Boom document. 

With the master pallet created, we applied these colours to our bouncing ball backgrounds and tested with other documents to see the results of the colours we collected. 

In conclusion I this session was an introductory session to the new software; Toon Boom and mainly learning how to use it. I feel that I have learnt a lot from this session but will have to continue to use the software to develop a further understanding of the tools and techniques. 

Jumping Man

We were assigned to create a jumping animation for a character. This character would jump across the screen and we need to apply all the principles we have learned so far into this jump.  The character we were given was a box with a round head with a pair of arms; we couldn't change this character in any way i.e. adding a face or hair etc.
This character was chosen to not over complicate the jump with any unnecessary features. In addition the simplicity of the character creates a challenge for us to add a sense of character to a couple of simple shapes.
I began with a layout to plan the jump:
With the layout created, I then started to create the animation. I had already planned the movements in my spare time.
This is the first test I created, the character has no arms because I wanted to add them alter because they would be used to demonstrate secondary action; it would be easier to animate them separately.

I was not pleased with the result of this test because of the lack of anticipation in the direction the jump would go. This is because I did not make the character lean backwards to anticipate that the character would jump forwards. Because in this test the character anticipates the jump by squashing downwards, but then the overlapping action makes no sense because there is not enough energy for the body to react in such a way.
Therefore I created another test to better anticipate the direction of the jump:


I am pleased with the result of this test because I built from the problems I had found in the previous test. I believe this test shows a range of principles including: secondary action, over lapping action, squash and stretch etc. 

 Session 2: 3/12/15

We started with reviewing the task we were assigned last week: to complete the jumping box. After discussing my video we found that my animation would be more effective if there was an extended anticipation to exaggerate the action of the jump. This is effective because it over exaggerates the anticipation which exaggerates the energy required to make the jump. 
Here is the improved jump:


After that we started the next assignment where we had to animate a scenario with a small and large box. The scenario was:
-The small box would jump up and down, the large box notices
-The small box is proud of the jumps, the large box is not impressed
-The large box jumps into the air; the little box reacts 
-The large box lands and is proud of its jump; small box reacts to large box's landing

I did this by breaking down these sections and animating them separately because I was using a lot of layers for all of the different animations. I felt that if I kept all of the layers in the one document it would be: very complicated and a greater risk of Toon Boom crashing. 
I started by planning all of these sections and acting them out myself thinking what would i do in this situation. I then thought how to stage and exaggerate both of these characters actions; that they are so 'over the top' that it is completely clear what they doing.
Here are the separate videos of each section:

[Section: Little Guy Jump]
This was a simple start because I applied what I had learnt from the last session to the little guy jumping. I used very exaggerated positions and added the arms waving to show that he is trying to get the big guy's attention. I also added the neck movement to show that he is looking. I really wanted to exaggerate the large box's size; i chose to give him a very large body and a tiny head which i feel has done this effectively. 

[Section 2: Little Guy Jazz Hands]
I did have some trouble initially thinking of a way to show that the little guy was proud. Then i had the idea of being of stage and being very cliche with 'Ta-Da' because the boxes have no dialogue i chose to show this with the staging of the little guy and the 'jazz hands'. 
I feel that the big guy's reaction is appropriate to show that he is saying 'no no no' slowly due to his large size. 

[Section 3: Big Guy Jumps]
This was the largest and most challenging section of them all. This is because there is a lot of actions by the large character and even some by the small box. I really wanted to stage and exaggerate the large jump therefore i chose to have the large box anticipate the large jump with twists as I believe this is an effective way to illustrate power and tension. 
as the focus of the section was on the large character the small box does not do as many actions as the large box but still has quite a lot of movement. 

[Section 4; Little Guy Looks Up]
This next section was important for the comical value of the scenario as this is plays on the audiences expectations and the small box doesn't do a lot of actions, but they are still important. I wanted to add character to the small box in this section; I made him look at his watch and scratch himself because I feel that is what most people do if they are waiting for something to happen. 

[Section 5: Big Guy Lands and Proud]
This is the final section where the large box lands. I found the landing difficult because I had to research how the body reacts in a landing and to not make the landing look like a jump in reverse. I also exaggerated the large box's proud moment and made fun of his 'large-ness'. 


I then compiled all of the sections together into one video. 


This was a lot of work and this will be reflected with my tutor next session. 

 Session 3: 10/12/15

 We started this session again with reflection of the previous assignment which was the scenario of the little and large box's jumping competition.
After speaking with my Tutor there were a number of improvements needed to make the video effective:
-To exaggerate the large box's weight further, I would add camera shake
-Reduce the time when the large box wants to jump because this is too long of a pause
Improve the reaction of the small box to the large box's landing because the energy reacts incorrectly

Here is the video of the jumping competition with the improvements:


after these improvements i believe my video is far more effective than before. 

This session we were assigned to complete a piece of animation which was a 'double take' this is an exaggeration of a character reacting to a situation and is used for comedic value.
The scene was:

-Open with a box character minding his own business
-A noise is heard and the box character reacts
-The box character sees the scary 'thing'
-Returns to normal position as if nothing had happened
-Turns back and reacts to situation

I started with a rough storyboard and initial sketches of how the box character should react. 
Here is the animation I made:



I didn't add a scary 'thing' in the end because i felt i was spending too much time thinking about what could be there for rather than focusing on the double take of the character. 
i can always return to this project and add something scary later but to meet the deadline I felt that this was not essential. 

Link to 2D Collection 2015: https://www.youtube.com/watch?v=kGcW-Xf1aeI

Conclusion

Over these three weeks I have learnt a lot about Toon Boom and the animation principles. Toon boom is a fantastic piece of software that i enjoy using to create animations and wish to continue using it to make more work. 




Thursday, 12 November 2015

Stop Motion Workshops: 3 Week Rotation

Stop Motion Workshops: 3 Week Rotation

Introduction

Within this rotation we created a series of stop motion test videos to develop our understanding of stop motion animation. We had an external tutor who has worked in the stop motion industry on numerous projects. These session have also been compacted due to problems; we had only two extended sessions within a week whereas other groups have had three weeks to complete their tests. Despite the limited time, we have to create all of the tests before the final deadline in December. This is the space we worked in:
We would have the Mac book connected with a DSLR which would then take images of what is on the 'stage'. We would move the object an image at a time which would then be played together as a video; creating the illusion of movement.

Session 1: 6/11/15

This session was primarily the introductory session where we had the task of demonstrating a basic understanding of some animation principles and demonstrate them through the tests of animating a simple block. Each of the tests we were assigned, we had to create another which ran on twos; we would have one test that ran on 'ones' and another which ran on 'twos'. this would allow us to see the difference between the tests and establish preferences.
These tests included:
Block
-Moving a block evenly along a line with equally spaced intervals.
-Moving a block along a line demonstrating acceleration and declaration.
-Swinging a block along a curved path demonstrating acceleration and declaration.
-The block dropping from a height displaying the properties of a tennis ball.
-The block dropping from a height displaying the properties of a cannon ball.
Puppet
-The puppet throwing a ball demonstrating: staging, exaggeration, anticipation and over-lapping action
-The puppet striking a ball with a bat demonstrating: staging, exaggeration, anticipation and over-lapping action
-The puppet lifting a heavy object demonstrating: staging, exaggeration, anticipation, secondary action and weight.

Blocks

Even Movement Test

These next tests are of the block moving along the X axis in a straight line with even spacing on both 'ones' and 'twos' respectively.
Ones


As you can see in the video, the black box moves up and down in the Y axis as if it is 'bobbing' along the line (X axis). I did not want this result however because I wanted the box remain level. Therefore I would next time ensure that the box/ object is level throughout the tests by utilising the tools of the software or using more practical measuring and levelling methods e.g. using a ruler.
Twos
with this test I had used the 'onion skinning' tool on the Dragonframe software which allows the user to see both the current and previous frame at the same time; therefore I had a better understanding of where the block had just come from and to keep the block level. Despite my efforts I find the path is still not perfectly level; because the block again 'bobs' up and down the X axis.
Comparison
I feel that I prefer the 'ones' test because of the smooth movement despite the 'bobbing'. I feel this because the 'twos' test was created incorrectly and that I had spaced incorrectly so that the movement felt staggered.

Acceleration/ Deceleration Test

These next tests are of the block accelerating and decelerating along the x-axis to show the principle of momentum and acceleration/ deceleration.
Ones

I feel pleased with this test because it does demonstrate acceleration and deceleration; however I still notice a dip in the x-axis during the movement. I feel that I have demonstrated the principles of acceleration and deceleration; however I would improve the final video by ensuring the object was level.
Twos

I feel that this test was lacking because it did not have a great enough contrast between the extreme movements within the center of the line and then the tiny movements at the beginning and end of the line. If I had done this, this test would be far more effective.
Comparison
I feel that comparing these two tests isn't completely fair due to the ineffective spacing within the second test on 'twos'. Despite this I feel that the 'ones' test is far more effective due to the smooth movement.

Swing Test

These next tests are of the block swinging on a rope much like a newton's cradle without the other weights on strings. This is again to show our understanding of animation principles such as the concept of gravity, mass, energy and acceleration/deceleration.
Ones


I would improve this test by reducing the frames on the second swing because they are not even and it feels that the swing almost 'freezes' in the air and hangs fro a frame or two before swinging again. This is only a minor mistake that has made a big impact. I am pleased however with the decaying effect that energy is exerted during the swing and finally comes to  complete stop.
Twos

I would improve this swing by the spacing of the block to make the swing smoother and to reduce the number of frames at the first swing because as it is about to transfer to the second swing, (in my opinion) the block is in the air too long and feels un-natural.
Comparison
Out of these two tests I believe the 'ones' were better because the video is both longer and better quality of animation despite the improvements needed.

Tennis Ball Test

These next tests are of dropping the block and replicating the mass of: a tennis ball in the block. therefore the block would be light and bouncy and we must show this through the animation.
Ones


I would improve this by reducing the number of frames during the falls because I feel that they are a little slow. This makes the fall not seem natural and not as effective as I had hoped it would be during the production.
Twos


I would improve this by increasing the height of the second bounce to clearly show the decay of energy per bounce. I would also reduce the number of frames much like the previous test because again it looks too slow and looks un-natural.
Comparison

Despite the needed improvements I feel that the ones test was smoother for the animation for the ball falling.

Cannon Ball Test

These next tests are much like the previous ones. However this time we must express the mass of the block being a: cannon ball. Therefore there would be very little bounce and must show that the block is very heavy.
Ones


To exaggerate the mass of the cannon ball I moved the camera as well as the block hoping it would enhance the test. I was inspired by other cartoons and films where an object with create mass would hit the ground and the ground would move around the object to exaggerate the mass. However I feel that this has ruined the test and has made more of a distraction that enhancement. I would therefore do this test again without the camera moving to express the mass of the block.
Twos


Again I would improve this test by removing the camera movement.  would also reduce the number of frames for the fall and reduce the bounce to further exaggerate the mass of the block.
Comparison

Despite the mentioned improvements needed for both tests, I prefer the ones test because of the smoothness and spacing of the animation.

Puppet

Throwing Ball Test

This next test is the puppet; known as Tim throwing a ball. Tim didn't have any props; therefore we had to stage and exaggerate Tim's movements to mime his actions.
Block


I am pleased with the block test because it clearly shows both the actions of Tim and how the movement progresses.
Full


I am pleased with the result of this test because during production I intended to focus on the anticipation, over-lapping action and staging of Tim. I would improve this test however by reducing the movement of the paper which was accidental as I moved the puppet. I would also increase the number of frames during the slower movements to make them smoother which would contrast further with the very quick movements; exaggerating the faster movements further.

Striking Ball Test

This next test is of Tim miming swinging a bat to hit a ball.
Block


I would improve the block test by staging the puppet more effectively by making it clear that Tim is swinging a bat. Because I feel that the staging could be clearer.
Full


I would improve this test by (again) staging Tim effectively so that he is clearly swinging a bat. in addition to make the animation effective further I would add Tim looking in the distance to see where the ball has gone. This would make the animation flow better towards the end and to give Tim a sense of character and life.

Lifting Object Test

This next test is Tim trying to lift a very heavy box off the floor.
Block


I chose to add a small walk at the start because I wanted to keep Tim's position both consistent with the other tests and to express Tim's character before the lift. I chose I very exaggerated and 'tough' walk because it anticipates the situation to the audience.  I am pleased with this block because it clearly shows how the animation should turn out.
Full


I am pleased with the result of this test because I feel that I have both expressed the weight of the box and the character who is trying to lift said box. I chose this because I believed it would be more effective to express the mass of the block through the character rather than the block itself. I would however improve the first step of Tim because it appears he slides under his own foot and doesn't look like he is walking naturally.

Session 2: 12/11/15

Within this session we continued work on the puppet as we had demonstrated the basics with the block tests. We then discussed further about blocking and straight ahead animation, where we would plan the movements of the puppet and then create the final animation. This is an effective way to plan the movements of the puppet and how the animation would look before dedicating too much time or effort to the test.


This session we were assigned to create a test:
Puppet
-The puppet walking from one corner to another
-The puppet running/ sprinting from one corner to the other 

Puppet

Walking Test

This next test is of Tim walking from one corner to another.
Block


Again I wanted to express an emotion/mood through Tim's walk and I chose an extremely exaggerated angry walk.
Full


I would improve this test by reducing the number of frames where his feet are close to the floor because this makes it look difficult for Tim to walk. In this test it makes it look like Tim is walking through custard and he is not happy about it. I also believe the over exaggeration made Tim arch his back too much which makes the pose look even more uncomfortable and unnatural.
 next time I couldn't exaggerate the puppet as much but still try to express the mood the most effective way I can. I found this walk cycle extremely difficult because it was very complex to exaggerate correctly and for the model to stay in those extreme positions.

Running Test

This next test is of a block test for Tim to run.
Block

This block test is very short because I found that the puppet couldn't maintain these extreme positions and chose not to create the running sequence. Despite this I am pleased with the staging of the run because the poses are clearly staged and exaggerated.

Link to video of Stop Motion collection 2015: https://www.youtube.com/watch?v=WPS6_7ayIcA

Conclusion

Throughout these sessions I have learnt a lot about stop motion and the time and patience needed to create an effective animation. I have enjoyed applying the animation principles to real objects and how they turn out in a different medium. These are clearly shown in the puppet tests featuring Tim. I have enjoyed working with stop motion and I have learnt a lot from it; despite this I feel that stop motion is not 'right' for me but wouldn't turn away from it in future projects because the results are unique and special. I didn't particularly enjoy the limitations of the puppet or the set-up required before shooting a test, however these are different requirements for a different medium. on the other hand, I really enjoyed viewing the tests at the end of a shoot because I real life object suddenly comes to life and has a special quality and style to its movements.

Tuesday, 27 October 2015

Computer Animation Workshops: 3 Week Rotation

Computer Animation Workshops

Introduction

This is the second rotation out of the three week rotation period and we are now attending the Computer Animation Workshops. Previously we were doing the 3D workshop as you can see in another post. Within this rotation we will continue to learn how to use Maya 2016 by applying what we have learnt in the previous rotation as well as learning new information. 

Week 1: Castle Modeling

Introduction

This was the first week where we had to create a model of a castle of our choice within Maya 2016. This helped us review the tools of Maya we were already familiar with as well as use a range of new ones. 

Production 

We started with a quick recap of the tools where we had to create a humanoid figure with limbs using the tools of Maya. We had to create this figure from a single cube, and then build from that cube. this helped me learn how to use the 'Extrude' tool where the face would expand into another cube. This also helped me learn the different modes of Maya i.e. Face, edge, Vertex etc. because this was only mentioned in the 3D animation workshops whereas now I was able to thoroughly test with the tools and gain a better understanding. 

Firstly I created a cube and extruded from that cube to create the arms, legs and head. I gave this humanoid disproportions such as a large body and feet to give a sense of character and diversity. I also used the edge cut tool to split shapes such as the legs so that they are still one object but split down the middle. 
From there I experimented with other tools such as the different modes and testing the scale and move tools to enlarge the body and feet. I then pressed the '2' key to smooth the edges of the figure. As you can see in the next images, it shows the blue lines that represent the edges of the original shape. 






I am pleased with result of the figure because i didn't believe I could create an object as complex as that. However I would improve the edges of the character around the waist to give a greater sense of weight. I would do this by adding folds over joints and other parts of the body to exaggerate the fat overflowing and overlapping around the body. 

After this short exercise we had to create the castle. This was an enjoyable exercise as this allowed us to experiment with Maya's tools freely and create whatever we chose. We were assigned top create a castle I believe because of the basic structural shapes as well as the diverse towers and archways.  Whereas something organic would be too much of a challenge at this stage. 
Therefore I chose to create the castle from 'The Lord of the Rings' Helms Deep because I thought it would both be a challenge and enjoyable. 
We first had to gather some reference images of the castle we chose to visualise what we had to create and understand the shapes that were required. I gathered a few such as these as well as memory. 




As you can see the castle is more like a fort which is built into the mountain. therefore this required me to also create the mountain. I did this by creating a large flat cube and then using the vertex mode, I deformed the cube by dragging the vertices to create a rough face of a mountain. 
I then created the main part of the fort using the primitive polygon cylinder creator tool. I also used other primitive polygons to create the rest of the castle, mainly cubes. 


After creating the basic shape and layout of helms deep, i wanted to add an animation to the setting. I wanted to keep the animation simple so that it is not too time demanding but would still be effective. Therefore I created an AT-AT from the 'Star Wars' universe walking towards helms deep firing a few shots at the mountain behind. 



Despite the simplicity of the movements of the AT-AT, I still found it a challenge to create the movements. This was because of Maya and its tools there was a moment where I was trying to create the keys between the leg movements. however when i trued to move the legs, Maya would skew and warp the legs despite the fact i just wanted to rotate the shape, not deform it.


 With help from the tutor, I managed to animate the AT-AT walking with the skeleton rig he had created for me. This was because we couldn't figure out why Maya was deforming the shapes of the legs. The Tutor parented the legs to the body as well as the head to the body; I was able to freely move the legs without them deforming. This made this a lot easier to animate because I would focus on the joining and how the rest of the leg would follow rather than moving every part of the leg. 


From there I added blaster shots from the head of the AT-AT to hit the mountain behind the wall with explosions. All I had to do was time the shots of the blasters and to have the explosions appear and disappear at the correct times. This was simple because i just had the set shapes with no parenting or rigs; therefore I would just create this without assistance. 



Conclusion

I found this session enjoyable and very helpful in further understanding Maya and its possibilities. I found that I have used the mode tool the most as it was the most useful in deforming primitive shapes. Despite this I have also learnt that I need to learn how to solve problems in Maya because it effected my work to the point where I had to ask for assistance. I intend to develop my understanding of Maya to the point that i will able to solve most problems myself and continue to work without much disruption. I would like to improve my modelling skills to create appealing characters and objects in Maya.

Week 2: Texturing

Introduction

Within this session we focused on texturing the models we created in the previous session or the ones we created in this one. This was the next step from the previous session and we havn't looked too far into texturing.

Session

We started with a recap of Maya and an introduction to texturing. The tutor textured a house using both seamless textures and Photoshop. 
After the demonstration, we had to texture our own castle we had created last week or we could start fresh with a new model. I decided to create a new model because i wanted to test myself with the modeling tools to see if i had remembered everything I had learnt, as well as make a simpler model to texture; therefore i chose to create a house. 
I chose to create a cartoon inspired house, much like the houses seen in the classic mickey mouse cartoons. This is because I wanted to make my house look interesting and to see if it was possible to create a cartoon style house in Maya. 
I started with reference images such as these: 



I then started to create the shape of the house with a primitive cube shape and then began to sub-divide and extrude parts of the cube to create the shape of the house. This was a challenge as i had to manipulate the cube in a number of ways to achieve the 'toon' style by stretching the cube out of proportion and make it look stylistic. 
I then had to create the doors and the windows of the toon house using more primitive shapes. this was also a challenge as i had to use a combination of cubes and spheres to make the doors and windows stylised. I did copy the door to use as the windows to reduce the work needed to model,this is because the windows are similar to the door and it saves the time to create the same models. This is one unique ability given by computer modeling which would not be so easy in real life modeling/sculpting. 



I also made duplicates of the doors and windows because using the 'Booleans' tool, which cuts out the shape of an object depending on the intersection of another, deletes the windows and doors. Therefore when they are deleted I can use the duplicates as the final doors and windows.


After continued modelling with the toon house, I found it was taking too long and it was making it more difficult to texture; therefore I chose not to continue with the toon house and to start simpler to gain an understanding of texturing. 


I then started to model the basic house, I didn't use reference images this time because I knew what i wanted to make and intended to use the primitive shapes provided with minimal modifications. What I mean by this is that it wouldn't have much curves or organic shapes unlike the toon house. this made the model easier to texture later in the process. 


I made this house much like the same way i made the toon house but with much less manipulation and stylising. I used the same 'boolean' tool to create the door and windows along with the duplicates. 

once I had completed the modeling, to texture, we had to create a UV project that would then be edited in Photoshop. This UV is like seeing a map of the object that is created. An example of this if it is a cube: it would have a net of 6 squares that would be folded together to make a cube. 


We did this by going to UV layout and identifying each face of the object we created. once we had organised the UV window, we created a linked PSD document where we could edit different colours and textures onto these faces using Photoshop. I chose a cream colour with wooden plank texture for the houses exterior walls and a red colour with tiles for the roof. this is the result after texturing the model:

I also textured the chimney by using a seamless brick texture and wrapping it around the faces on the UV layout window. 

Link to Computer Animation Collection 2015: https://www.youtube.com/watch?v=1ke1qWYRQPo

Conclusion

I found the texturing session a challenge as it was very complicated in my opinion and takes a long time and great patience to make the model look perfect. This is because I also get over-whelmed by the number of tools on Maya and get lost navigating the menus. 
From this I have earn how to texture basic shapes and i will have to continue to learn how to use Maya and gain a better understanding of the software. This will enable me to progress and create complex models and texture them effectively. 

Sunday, 11 October 2015

3D Workshops: 3 Week Rotation

3D Workshops

Introduction

This post is about the three week rotation period where I did three weeks of learning how to use the 3D software Maya and apply the animation principles to the objects we created in the software. 

Week 1:Bouncing Ball

Introduction

This post is about my first attempt at 3D animation using Maya. I have tried to use 3D software before such as Blender, with no success. However with time and effort I managed to understand some parts of Maya, whereas before I had completely no clue how to do anything 3D. 
Within the workshop we were taught a number of key and essential tips and tools about Maya and we gained a basic understanding on how the software worked. 
Within the lesson we also applied the principles of animation to the bouncing ball using Maya. 
These included: Slowing in and out, Squash and Stretch, Timing and Spacing and Point to Point vs Straight Ahead.

Production

What I found when using Maya is that it is very mathematical compared to hand drawings which feel very organic. This was when I was squashing and stretching the ball, I had to maintain the balls volume as it stretched and squashed; when it stretched the proportions of the ball would be manipulated but the volume would remain the same. An example of this the ball stretches to twice the size (Y=1 / Y=2) therefore the width of the ball must be halved to maintain the ball's volume (X=1 / X=0.5) (Z=1 / Z=0.5).
This makes the squash and stretching of the ball more believable, whereas if I did not monitor the volume it would appear that the ball would be getting smaller and larger. 

Video




We also had to create 6 different shapes with 6 different renders, to learn how to use renders, and to be able to move shapes within the Maya space/ stage. 

Conclusion

Despite the worries and fears of 3D, I really enjoyed learning how to use it. I do have a LOT more to learn though. But I am pleased with the results. From this I have learnt that there is a lot of potential with 3D animation and I need to learn how to use it effectively.

Week 2: Bat and Ball

Introduction

This was the second week of our rotation. This week we would be applying the principles of: Anticipation, Squash and Stretch, Arcs, Staging and Over Lapping action to a baseball and bat. From this we would also continue to learn how to use Maya 2016. 

Production

To demonstrate these principles, we had to create a baseball bat and a ball that would fly in and be struck by the bat. Anticipation would be demonstrated by the bat pulling back ready to hit the ball. The ball would then fly in with the stretch of the ball demonstrating the speed and the squash the moment it is struck. The bat would follow an arc as it swings around to strike the ball. After the ball is struck, the bat would continue to move because of the excess energy used to swing and hit the ball. Finally the entire scene is staged in a way to demonstrate our understanding of staging using the lighting tools in Maya. 


We first created the bat using a circle, line and rotate tool to sculpt the bat. I found this a different way to create objects in Maya but yet effective. I did have to create a few bats before creating the ideal bat. My first bats looked like either champagne glasses or caveman clubs. 
Then using the rotate tool and side view I moved the bat into the key positions where it would swing and hit the ball. I had to time the bat striking the ball and how long it would take for the bat to make contact with the ball as well as the spacing to show the energy of the bat swing and overlapping action after. 






Applying what I had learnt last week, I found this task easier but still challenging. 
After we had done that we continued to learn the features and tools of Maya and we learnt about lighting. We were assigned to create a setup with at least a 3 lighting system and an object that followed a NERB path. 

Video


Conclusion

Overall I have found this rotation challenging as we are learning two different subjects at the same time: the software and applying the principles to that software. However this is needed and I wish to learn more, but there is much more to learn. I would probably improve the swing of the bat by making the bat swing faster as it hits the ball to add more power to the swing. 

Week 3: Man Walking

Introduction

This was the final week of 3D workshops as part of the three week rotation period and we had to create a walk cycle for character in Maya 2016. 
From this we would apply the principles of: Secondary Action, Exaggeration, Solid Drawing and Appeal. 

Production

We first created a basic structure of a humanoid character with a torso, four limbs and a head.

This was done by using the primitive shapes tools and creating the basic structure of the body. We were keeping the body simple just by using the primitive shapes as they were rather than trying the model a body out of them. This would have taken too long and over complicated the session.
From there we started to add keys to the movements of the character as he walked along. How he moved was very simple but to get that result was a challenge using Maya. This is because we have to remember the old tools and methods from before as well as applying and learning new ones.
Taking advantage of the software we also learnt how to loop the animation by telling Maya to continue the animation without us (the user) to do it ourselves. We would only have to make two keys positions of the walk and then tell Maya to keep the character moving.
We also added sound to the scene to make the character react to the sound to give the character more life and more of a personality. How he would react to the sound would reflect his personality and this was linked to appeal.



Video


Link to 3D Animation Collection 2015: https://www.youtube.com/watch?v=kim034L4vZE

Conclusion

This being the final week of the 3D rotation period I feel that i have learnt a lot from the first session and that I have progressed significantly. But I have much to improve on including understanding the tools and works of Maya as well as the delivery of my animation in Maya as they are not as effective as they could be.
Therefore from what i have learnt so far, I will continue to use Maya in my personal projects and research different methods o using Maya to find ones right for me.